01

Start with the use case

Record the intended symbol, data, scanning environment and retailer requirements. A consumer-engagement QR code and a point-of-sale symbol can have different specifications. Ask the relevant barcode authority or retailer for the current application requirements rather than choosing a size from a photo.

02

Check curvature on the finished tube

GS1 explains that curvature can hide parts of a symbol from a scanner and describes orientation considerations for curved packaging.[1] The result depends on the tube diameter, symbol dimensions and scanning arrangement. Show the printer the actual finished tube and intended orientation before finalising the dieline.

Do not assume a flat proof or a successful scan on one phone establishes compliance with a retailer specification.

03

Reserve a clear area

Keep the quiet zone free from text, graphics, seams, foil and cuts according to the applicable symbol specification. On a tube, consider the lid overlap and the position of any wrap joint. Agree whether a label or direct print will be used and ensure the printer can maintain placement across the assembled pack.

Illustrative review: a paper wrap is designed flat and its barcode sits near the wrap seam. When assembled, the seam or lid overlap enters the reserved area. Move the symbol in the artwork and review a representative finished pack before releasing the final plate. Confirm all dimensions against the applicable symbol requirements; this example does not set a placement tolerance.

04

Check the actual surface

Contrast, finish, curvature and glare can affect reading. GS1 identifies contrast and reflections as practical considerations for 2D symbols.[2] Review the final substrate, ink and finish, and obtain verification to the specification required for the application where applicable.

Keep a record of the verified artwork revision, actual tube, substrate, finish and label position. If one of those changes, ask the printer or verification provider whether a new check is appropriate. Reading a code with a camera is a functional check; formal verification uses a calibrated process and the required quality criteria.

05

Prepare the artwork brief

Send the tube diameter and height, dieline, barcode data and symbol requirements, retailer or scanning context, print finish and quantity per design. A general gift-box barcode checklist covers flat panels; this review focuses on curvature. MTT can discuss packaging projects from 1,000 pieces per design.

06

Sources

  1. GS1 General Specifications: curved surfaces, accessed 17 November 2026.
  2. GS1: 2D barcodes at retail point of sale, accessed 17 November 2026.