A printed outer sleeve. A separate tray that brings the product into view. Start with the packed contents, then choose the support, opening direction and finish.
Measure filled pouch thickness and the sealed top, not only the printed face. Plan the row spacing, support and access to each pouch without pinching its seal.
A soft pouch may settle or bunch up. Review its packed shape and removal access before approving the support. Keep abrasive edges away from the pouch surface.
Measure the widest lid rim and corner shape. Review the tray with the filled tin and check its base when withdrawn; an empty carton cannot establish the load.
Folded paperboard sleeve plus a separate folded tray. Compare a wrapped rigid drawer if board thickness and presentation call for a different construction.
Dimensions
State the product envelope, tray usable space, tray outside size and sleeve opening separately. Final clearances follow the loaded sample.
Board
Share the required appearance and packed weight. Confirm grade, measured thickness, grain direction and crease setup; grammage alone does not define stiffness or fit.
Support
Folded dividers or a fitted paperboard platform can be reviewed against the contents. Record cavity size, exposed seals or lids, and finger access.
Printing and finish
The coffee layout uses matte coating with selective gloss UV; the tea-tin design uses gloss varnish. Review the chosen finish on both sliding and visible surfaces.
Packing method
Confirm whether sleeves and trays arrive assembled or flat, who erects them, and the outer shipping arrangement. Do not assume every tray is pre-glued or ships in the same form.
For folding cartons, the existing minimum order is 1,000 pieces per design. Sampling, tooling, price and delivery are confirmed against the reviewed specification.
Approve the loaded pack, not just the artwork.
Load the real contents. Include pouches at their intended fill, or closed tins with the correct weight. Check supports and the tray base.
Slide through the full opening. Record snagging, side-wall spread, loose retention and marks at the sleeve mouth.
Confirm the finished surfaces. Compare print, coating, glue seams and folds using the intended board. Repeat fit checks after a material change.
Define the delivery pack. Review the outer carton and handling route separately. Retail presentation is not a transit-test result.