01

Choose a realistic vial orientation

Record the maximum capped length, body diameter and filled weight for every vial, including labels and seams. Draw the tray with the same orientation the packing team will use. A channel needs to locate the vial while allowing fingers to lift it without pulling the sprayer or cap.

A six-vial set with two cap sizes may need two channel shapes or a tested common support. A repeated graphic opening is not proof that both samples fit. The image illustrates a concept, not measured tolerances or a completed production run.

02

Plan tray folds and sleeve travel together

The folded tray walls, glue tabs, print and the full card stack all occupy space. Erect the tray using the intended board, then slide it empty into the sleeve. Add the insert, vials and cards one stage at a time and identify where resistance begins. Inspect folding, edge contact and any rubbing at the opening after repeated handling appropriate to the project.

Holmen explains creasing and folding as linked operations in paperboard conversion; the board and crease design should be reviewed as a system rather than assigning a universal crease setting.[1]

03

Agree the card and version handoff

Measure the complete scent-card stack and decide whether it sits beside or above the vials. Check that it does not protrude into the sleeve opening or press on a cap. Use a position map linking vial, card and artwork version; the scent-identification guide covers that operational control in more detail.

04

Compare the loaded and empty pack

An empty tray can slide well yet bind once the product or insert changes its shape. Check the loaded sample, safe removal and the intended outer shipping pack. Compare the folding paperboard concept with the four-vial rigid drawer concept; their materials and illustrated contents differ, so sample the chosen specification.

05

What to include in the brief

Send capped vial samples or supplier drawings, filled weights, set count, card stack dimensions, proposed assembly location, artwork, quantity by design and destination. MTT can review projects from 1,000 pieces per design, with paper, colours, logo and final fit confirmed on a sample.

06

Compare two packing layouts before tooling

Illustrative example: six vials lie in one row, and a folded leaflet is added beside them. On the first trial, the leaflet catches the sleeve edge. The team can move the leaflet into a shallower pocket or change its fold, then repeat the loading sequence with representative printed parts. This is a planning example, not a completed order.

Ask for the tray blank and sleeve to be reviewed together. Holmen describes crease formation as a material-dependent conversion process; request a physical sample on the proposed board instead of transferring a crease setting from a different substrate. Record which side is printed, where adhesive is applied and whether the assembly is supplied flat or erected. Keep the same vial and card versions when comparing revisions.

07

Sources

  1. Holmen: paperboard creasing and folding, accessed 18 November 2026.